The hardy was a sloppy 1-1/8” and my hardy tools did not fit well in this hole. A few surface flaws remained in the side of the horn after grinding and these were also left in place. I decided not to grind these out, as they probably do not pose a potential problem worth all of the effort that would be expended removing them. Grinding also showed some flaws around the hardy hole (Fig. The grinder quickly removed the milling marks. Grinding with the belt grinder will remove the swirls from the disk grinder I would estimate it at between 50% and 75%. I tried the hammer drop test and, while the anvil had a high pitched ring, the rebound was not spectacular. The horn is designed for castability, not the needs of the smith (Fig. It will take a lot more work on the grinder to get this horn to a true round shape. 5).Ĭertainly a better finish but the shape still looks like a ducks bill. I took up my 4.5” grinder and went to work on the horn and the face.Īfter about 20 minutes, they looked like this (Fig. 4) that left the surface more like a fine file. The face of the anvil bore the milling marks (Fig. I have named this anvil “The Toad” for obvious reasons. As you can see, Russian steel foundry technology is not represented here at its best. I noticed a line, under the face, that suggested that this anvil had a tool steel face cast into it(Fig. Not much effort was spent dressing up the parting lines on this casting. The ridge running down the horn is the parting line, the place where the cope and the drag meet (Fig. This anvil is like most things from the former Soviet Union: blocky and graceless. Once out of the crate, it was obvious, this was an ugly anvil The anvil came in an open wooden crate that, for the most part, kept it confined sufficiently to prevent any shipping damage. The following is a review by a hobbyist who bought one. The 110# Russian cast steel anvil now being offered by Harbor Freight has generated a lot of interest in the Blacksmithing community. This is significantly lower than the low cost Czech imports or even used beat up anvils.Ĭarefully note that these ARE NOT the same as the similar looking Chinese cast iron "Anvil Shaped Objects" also sold by Harbor Freight. These NEW anvils are currently being sold at the amazing price of $1/pound or less delivered in the U.S. There has been a lot of buzz about theses anvils on various Internet forums and we thought we would clear the air. This is a report on the 110 pound (50 kg) Russian cast steel anvil currently being sold by Harbor Freight. Product Report by Robert Nichols AKA quenchcrack It is excellent for riveting, flattening, forging, and forming metal.Russian Cast Steel Anvil: anvilfire product reportīlacksmithing and metalworking questions answered. It is widely used by metalworkers and smiths in any metal shop. Wide Application: The anvil is ideal for hammering, straightening, and for shaping workpieces. The wide countertop and flat surface provide a better user experience. Large Working Area: This anvil metal 110 lbs/50 kg forge comes with a comfortable and wide work surface, giving a large working area.And the spray coating effectively relieves the oxidation reaction. Polishing Treatment: With fully polished surface area, the blacksmith anvil is corrosion-proof and services long-lasting use through quenching treatment.And the hardy hole and pritchel hole can show a good performance in accessories’ punching and twisting. Holes & Horns for Different Uses: Round horn and the flat horn of the anvil blacksmith are used for smoothing, bending, and shaping.Our steel anvil blacksmith has excellent grade material of 50 HRC. Premium Material 110 lbs: This steel anvil is made of drop-forged, high-grade steel, which features high hardness, strength, and durability.
0 Comments
Leave a Reply. |